Eufy security cameras are renowned for their intelligent motion detection capabilities, dependability, and sharp video quality. Even the most reliable gadgets may have problems, though, and one of the most frequent ones is when the eufy camera not picking up motion as it should.
Don’t panic if your eufy camera not picking up motion. We’ll look at the typical reasons for this issue, provide detailed solutions, and offer advice on how to ensure that your camera is always watching when it should.
Common Reasons Your Eufy Camera Not Picking Up Motion
It’s crucial to comprehend the potential reasons why your eufy security camera not picking up motion before beginning any repairs:
Incorrect Motion Detection Settings
- It’s possible that your camera’s motion sensitivity, activity zones, or detection type aren’t set correctly.
Low Level of Sensitivity
- Your camera won’t detect slower or smaller motions if the sensitivity is set too low.
Incorrect Camera Positioning
- Your camera’s capacity to detect motion may be limited if it is positioned too high, too low, or at an uncomfortable angle.
Barriers in the Field of Vision
- Furniture, buildings, and trees might obstruct the detecting sensor, decreasing its accuracy.
App or Firmware Issues
- Outdated firmware or flaws in the Eufy Security app might cause detection delays or failures.
Lighting Conditions
- The camera’s sensor may become confused by extremes in brightness, darkness, or glare.
Mode of Battery Saving
- When battery-saving features are activated, certain Eufy cameras decrease their motion detection speed or range.
Methods For Solving Eufy Camera Not Picking Up Motion Issue
1. Verify the Motion Detection Configuration
- Launch the Eufy Security application.
- Choose your camera from the list of devices.
- Go to Motion Detection settings.
- Test after increasing the sensitivity to a medium or high level.
- Make sure the Activity Zones cover the regions where motion should be detected if you plan to use them.
2. Modify the Position of the Camera
- For best detection, position the camera between 7 and 10 feet above the ground.
- Tilt it so the action moves across the field of vision, not straight at the camera.
- Do not aim it straight at surfaces that reflect light or bright lighting.
3. Clean the sensor and lens of the camera
- The motion sensor may be affected by dust, grime, or spider webs.
- Wipe the lens and sensor region carefully with a soft cloth.
4. Update the app and firmware
- Circumnavigate to the camera’s settings, open the Eufy app, and look for firmware elevations.
- From the app store on your phone, update the Eufy Security app.
- Updating your program guarantees that motion detection algorithms operate effectively.
5. Try Motion Detection at Various Hours of the Day
- Detection can be significantly impacted by lighting. To determine whether any adjustments are necessary, test your camera in low light, bright daytime, and evening settings.
6. Turn off battery optimization (for models that run on batteries)
High power-saving settings may cause motion capture to be delayed if you’re using a battery-operated Eufy camera.
- Go to Power Manager in your camera settings.
- Choose Optimal Surveillance or High Sensitivity over Battery Saving.
7. Reset Eufy camera and adjust its settings.
Try restarting the device if nothing helps and still eufy security camera not picking up motion:
- Hold down the Sync button until a beep sounds.
- Using the camera setup procedure in the app, reconnect the camera.
8. Verify Your App Access and Account
- Check that everything is linked successfully by logging into your account at eufy.com login if your settings keep resetting or you have synchronization problems.
Expert Advice For Enhanced Motion Detection
- Overlap Fields of View: To avoid blind spots, if you have more than one camera, make sure their coverage regions somewhat overlap.
- Steer clear of glass barriers: Motion sensors may have trouble detecting movement through glass doors or windows.
- Adapt Night Vision: To aid with nighttime detection, turn on the spotlight, if it is available.
- Review recordings on a regular basis to look for patterns in missed detections.
Final Thoughts
Although it might be annoying when a eufy camera not picking up motion, you can usually resolve this issue on your own by changing the settings, positioning, or surroundings. You may make sure your Eufy device records every significant moment by tweaking your sensitivity, moving your camera, changing the software, and maintaining a clean camera.